The vehicle dossier US · 2011
2011 Dodge
CHARGERProblems & recalls
695 distinct owner reports in the NHTSA snapshot. Electrical system appears in 395 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 695 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
59,750 miles is the median among 576 reports with usable mileage. The middle half spans 44,000–80,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
11 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULECampaign 19V018000
A do-not-drive advisory is recorded. Verify applicability immediately with NHTSA or the manufacturer.
Reported concern
Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Manufacturer’s stated response
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.
Manufacturer campaign: V01
Read campaign 19V018000 at NHTSAAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULECampaign 18V021000
A do-not-drive advisory is recorded. Verify applicability immediately with NHTSA or the manufacturer.
Reported concern
Chrysler (FCA US LLC) is recalling certain 2009-2013 Jeep Wrangler, Chrysler 300, Dodge Challenger and Dodge Charger vehicles, and 2009-2011 Dodge Dakota vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Chrysler is recalling certain 2009-2010 RAM 4500 Cab Chassis, RAM 5500 Cab Chassis, RAM 3500 Cab Chassis, Jeep Wrangler, Chrysler 300, Dodge Dakota, Dodge Challenger, and Dodge Charger vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Chrysler is also recalling certain 2009 RAM 3500, RAM 2500, RAM 4500 Cab Chassis, RAM 5500 Cab Chassis, Dodge Durango, Chrysler Aspen, RAM 3500 Cab Chassis, Jeep Wrangler, Chrysler 300, Dodge Dakota, Dodge Challenger, and Dodge Charger vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming. In the event of a crash necessitating deployment of the passenger frontal air bag, these passenger air bag inflator may explode due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Manufacturer’s stated response
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U03.
Manufacturer campaign: U03
Read campaign 18V021000 at NHTSAELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATORCampaign 17V435000
Reported concern
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Challenger, Dodge Charger, Chrysler 300, Dodge Durango, and 2012-2014 Jeep Grand Cherokee vehicles. The affected vehicles have electro-hydraulic power steering (EHPS) and are equipped with a 5.7L or a 3.6L engine and a 160, 180 or 220 amp alternator. In the affected vehicles, the alternator may suddenly fail.
Manufacturer’s stated response
Chrysler will notify owners, and dealers will inspect the alternator and depending on the part number, will replace the alternator, if necessary, free of charge. The recall began February 12, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T36.
Manufacturer campaign: T36
Read campaign 17V435000 at NHTSAAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULECampaign 16V352000
A do-not-drive advisory is recorded. Verify applicability immediately with NHTSA or the manufacturer.
Reported concern
Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2012 Jeep Wrangler, 2008-2012 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2012 Chrysler 300, 2006-2012 Dodge Charger, 2005-2011 Dodge Dakota, and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AL, CA, FL, GA, HI, LA, MS, SC, TX, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Chrysler is also recalling 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2009 RAM 3500 Cab Chassis, 2008-2009 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge Durango, 2007-2009 Chrysler Aspen, 2007-2009 Jeep Wrangler, 2008-2009 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2009 Chrysler 300, 2006-2009 Dodge Charger, 2005-2009 Dodge Dakota and 2006-2009 Mitsubishi Raider vehicles originally sold, or ever registered, in AZ, AR, DE, Washington D.C., IL, IN, KS, KY, MD, MO, NE, NV, NJ, NM, NC, OH, OK, PA, TN, VA, and WV, or "Zone B." Lastly, unless included in "Zone A" or "Zone B" above, Chrysler is recalling certain 2005-2008 RAM 2500, 2006-2008 RAM 3500, 2007-2008 RAM 3500 Cab Chassis, 2008 RAM 4500 and 5500 Cab Chassis, 2004-2008 Dodge Durango, 2007-2008 Chrysler Aspen, 2007-2008 Jeep Wrangler, 2008 Dodge Challenger, 2005-2008 Dodge Magnum, 2005-2008 Chrysler 300, 2006-2008 Dodge Charger, 2005-2008 Dodge Dakota, and 2006-2008 Mitsubishi Raider vehicles originally sold, or registered, in AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY.
Manufacturer’s stated response
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
Manufacturer campaign: S43
Read campaign 16V352000 at NHTSASTRUCTURECampaign 16V043000
Reported concern
FCA US LLC (Chrysler) is recalling certain model year 2011-2016 Dodge Charger vehicles manufactured August 23, 2010, to January 7, 2016. When an affected vehicle is lifted using the supplied tire jack without chocking the wheels, the vehicle's body-side sill may give causing the tire jack to fail and the car to fall.
Manufacturer’s stated response
Chrysler will notify owners, and dealers will provide owners with wheel chocks and instructions for their use, free of charge. The recall began on March 21, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S03.
Manufacturer campaign: S03
Read campaign 16V043000 at NHTSASEAT BELTSCampaign 15V467000
Reported concern
Chrysler (FCA US LLC) is recalling certain model year 2011-2014 Dodge Charger vehicles manufactured May 6, 2010, to June 5, 2014. In the affected vehicles, the side impact sensor calibrations may be overly sensitive, and as a result, the side air bag inflatable curtains and seat air bags may unexpectedly deploy and the seat belt pre-tensioners may activate.
Manufacturer’s stated response
Chrysler will notify owners, and dealers will update the Occupant Restraint Control module calibration, free of charge. The recall began on August 25, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R35.
Manufacturer campaign: R35
Read campaign 15V467000 at NHTSAELECTRICAL SYSTEM:ALTERNATOR/GENERATOR/REGULATORCampaign 14V634000
Reported concern
Chrysler Group LLC (Chrysler) is recalling certain model year 2011-2014 Chrysler 300, Dodge Charger, Challenger, and Durango; and 2012-2014 Jeep Grand Cherokee vehicles manufactured April 22, 2010, to January 2, 2014, and equipped with a 3.6L engine and a 160 amp alternator. In the affected vehicles, the alternator may suddenly fail.
Manufacturer’s stated response
Chrysler has notified owners, and dealers will replace the alternator, free of charge. The recall began on February 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P60.
Manufacturer campaign: P60
Read campaign 14V634000 at NHTSAEXTERIOR LIGHTING:HEADLIGHTSCampaign 14V101000
Reported concern
Chrysler Group LLC (Chrysler) is recalling certain model year 2011-2012 Dodge Charger vehicles manufactured May 20, 2010, through November 8, 2011, and equipped with halogen headlamps. In the affected vehicles, a sub-harness for the headlights may overheat and cause the low beam headlights to go out.
Manufacturer’s stated response
Chrysler will notify owners, and dealers will replace the headlamp jumper harnesses and bulbs, or the headlamp assemblies, as necessary, free of charge. The recall began on May 2, 2014. Owners may contract Chrysler at 1-800-853-1403. Chrysler's number associated with this recall is P08. This recall concerns non-police vehicles. A separate campaign was launched in 2012 to address police vehicles. See NHTSA recall 12V-042.
Manufacturer campaign: P08
Read campaign 14V101000 at NHTSAAIR BAGSCampaign 13V118000
Reported concern
Chrysler Group LLC (Chrysler) is recalling certain model year 2011-2012 Chrysler 300, Dodge Challenger, and Dodge Charger vehicles manufactured April 11, 2011, through December 14, 2011. The affected vehicles may have improperly sized terminal crimps on the seat side-airbag wiring harness which may cause the seat side-airbags to malfunction and illuminate the airbag warning light.
Manufacturer’s stated response
Chrysler will notify owners, and dealers will replace both driver and passenger seat airbag wiring harnesses, free of charge. The recall began on April 22, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N07.
Manufacturer campaign: N07
Read campaign 13V118000 at NHTSAELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERSCampaign 12V197000
Reported concern
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011 AND 2012 300 AND DODGE CHARGER VEHICLES. THESE VEHICLES MAY LOSE ABS/ESC SYSTEM FUNCTION DUE TO AN OVERHEATED POWER DISTRIBUTION CENTER.
Manufacturer’s stated response
CHRYSLER WILL NOTIFY OWNERS, AND DEALERS WILL RELOCATE THE ABS/ESC SYSTEM FUSE, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MAY 18, 2012. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Manufacturer campaign: M10
Read campaign 12V197000 at NHTSAELECTRICAL SYSTEM:WIRINGCampaign 12V042000
Reported concern
CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011 and 2012 DODGE CHARGER POLICE VEHICLES. THE LOW BEAM HEADLAMPS OF SOME VEHICLES COULD FAIL DUE TO AN OVERHEATED BULB HARNESS CONNECTOR. OTHER VEHICLES MAY LOSE ABS/ESC SYSTEM FUNCTION DUE TO AN OVERHEATED POWER DISTRIBUTION CENTER.
Manufacturer’s stated response
CHRYSLER WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE HEADLAMP JUMPER HARNESSES AND RELOCATE THE ABS/ESC SYSTEM FUSE WITHIN THE POWER DISTRIBUTION CENTER, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON APRIL 2, 2012. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Manufacturer campaign: M01
Read campaign 12V042000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
152 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
108463PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKENHTSA ID 11025727
PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
Components: SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 11025727 at NHTSA108464PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKENHTSA ID 11025724
PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
Components: SERVICE BRAKES. Confirm detailed applicability in the original document.
Source record 11025724 at NHTSA9100226Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that…NHTSA ID 10248509
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10248509 at NHTSA9100226Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that…NHTSA ID 10244348
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
Components: ELECTRICAL SYSTEM:WIRING. Confirm detailed applicability in the original document.
Source record 10244348 at NHTSA9100196Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be usedNHTSA ID 10242717
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Confirm detailed applicability in the original document.
Source record 10242717 at NHTSA0815223Fuel Pump Connector Replacement The technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness (pigtail) when replacing the fuel pump mod…NHTSA ID 10241118
Fuel Pump Connector Replacement The technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness (pigtail) when replacing the fuel pump module.
Components: ELECTRICAL SYSTEM · FUEL SYSTEM, GASOLINE. Confirm detailed applicability in the original document.
Source record 10241118 at NHTSA9003357AADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider …NHTSA ID 10247906
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10247906 at NHTSA9003357aADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider …NHTSA ID 10234379
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10234379 at NHTSA9003357ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer …NHTSA ID 10247905
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Components: BACK OVER PREVENTION. Confirm detailed applicability in the original document.
Source record 10247905 at NHTSA9003357ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer …NHTSA ID 10234378
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10234378 at NHTSA3100122Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes wh…NHTSA ID 10229572
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10229572 at NHTSA3100122Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes wh…NHTSA ID 10225424
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10225424 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Desiccated Air Bag Inflator RuptureEA21002
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Find investigation EA21002Alternator failurePE14022
On July 22, 2014, the Office of Defects Investigation (ODI) opened PE14-022 to investigate 14 complaints (VOQs) alleging incidents of alternator failure resulting in engine stall while driving in model year (MY) 2011 through 2012 Dodge Charger vehicles.The MY 2011 through 2012 Dodge Charger vehicles were sold with three different engine options:1) 3.6L V6 (VIN8 = G), 88,766 vehicles; 2) 5.7L V8 (VIN8 = T), 38,615 vehicles; and 3) 6.4L V8 (VIN8 = J), 2,406 MY 2012 vehicles.The 14 VOQs identified in the PE14-022 opening resume involve 13 vehicles with 3.6L V6 engines and 1 vehicle with unknown engine (no VIN provided).In an October 7, 2014 letter to NHTSA, Chrysler described a safety defect condition that could result in rapid alternator failure having limited or no detection in approximately 434,581 MY 2011 through 2014 Chrysler 300, Dodge Charger, Dodge Challenger, Dodge Durango and Jeep Grand Cherokee vehicles equipped with 3.6L engines and 160 amp alternators (NHTSA Recall No. 14V-634, Chrysler P60).The subject alternators are used in vehicles equipped with 3.6L V6 engines and without towing packages.According to Chrysler, the silicone diodes in the alternator rectifier bridge may experience thermal fatigue due to cyclic loading from the Electric Hydraulic Power Steering (EHPS) system, eventually resulting in no output, reduced output, or a fully shorted to ground condition.These failure modes vary in their time to failure and warning to the driver.Depending on the failure mode and timing, system voltage may drop to critically low levels, disabling systems such as the Anti-lock Brake System/Electronic Stability Control, Engine Control Module/Central Body Controller, or a total vehicle electrical system shut down (in the event of a short to ground failure mode).Analysis of complaints to ODI and Chrysler identified a total of 146 incidents of alternator failure resulting in engine stall while driving in MY 2011 through 2012 Dodge Charger vehicles, including 142 involving vehicles equipped with the 3.6L V6 engines (1.6 IPTV) that were included in 14V-634 and 4 involving vehicles with 5.7L V8 engines (0.1 IPTV), which are equipped with different alternators.Analysis of all alternator failure complaints found that approximately 48 percent of VOQs and 21 percent of Chrysler complaints involved allegations of engine stall.Many (98) complaints reported fire and/or smoke, but analysis of these determined that they involved thermal damage to the alternator diode and did not identify any incidents involving damage beyond the alternator assembly.One VOQ identified in the opening resume for PE14-022 alleged a crash, but further evaluation determined that this involved a minor rear-end impact with slight bumper damage.This investigation is closed based on Chrysler's decision to conduct a safety recall.The VOQs associated with this investigation are:10641479,10641366,10641349,10642017,10640770,10640687,10640553,10639692,10638810,10638356,10638175,10638143,10637460,10633806,10633304,10632943,10632006,10631704,10631613,10631420,10631088,10630991,10630854,10630844,10630108,10629623,10629603,10628228,10628150,10627941,10627342,10626452,10626254,10625962,10622385,10622340,10621603,10620961,10619481,10618950,10618948,10618539,10618476,10618334,10618081,10618107,10616834,10616461,10616456,10615754,10615719,10606580,10605090,10604958,10597295,10592085,10588675,10587141,10562463,10559730,10511407
Recorded closure: Nov 6, 2014
Campaign reference in the source: 14V634000
Find investigation PE14022Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.