The vehicle dossier US · 2000
2000 Dodge
CARAVANProblems & recalls
470 distinct owner reports in the NHTSA snapshot. Other components appears in 112 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 470 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
75,000 miles is the median among 222 reports with usable mileage. The middle half spans 46,000–115,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
13 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
EQUIPMENTCampaign 10E034000
Reported concern
CURT MFG IS RECALLING CERTAIN CLASS 3 RECEIVER HITCHES, P/N 13347, SOLD AS AFTERMARKET EQUIPMENT FOR USE ON 1997-2007 CHRYSLER TOWN AND COUNTRY VANS, 1996-2007 DODGE CARAVANS, AND 1996-2004 PLYMOUTH VOYAGER VANS. WHEN THE HITCH IS LOADED TO THE MAXIMUM RATING, THE HITCH MAY FRACTURE OR BREAK AT THE BEND LOCATION WHERE THE MAIN BODY OF THE HITCH MEETS THE HITCH MUFFLER STRAP.
Manufacturer’s stated response
CURT MFG WILL NOTIFY OWNERS OF RECORD AND WILL REPLACE THE HITCH FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN DURING AUGUST 2010. OWNERS MAY CONTACT CURT MFG AT 1-715-831-8713.
Read campaign 10E034000 at NHTSAEXTERIOR LIGHTING:HEADLIGHTSCampaign 09E025000
Reported concern
DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Manufacturer’s stated response
DOPE, INC. WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON JULY 28, 2009. OWNERS MAY CONTACT DOPE, INC. AT 1-626-272-1798.
Read campaign 09E025000 at NHTSAEXTERIOR LIGHTINGCampaign 09E012000
Reported concern
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Manufacturer’s stated response
SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
Read campaign 09E012000 at NHTSAVISIBILITY:GLASS, SIDE/REARCampaign 07E104000
Reported concern
CERTAIN CURVED TEMPERED REPLACEMENT GLASS MANUFACTURED BY HANGZHOU SAFETY GLASS LTD AND SUPPLIED TO SAFELITE BY AUTO TEMP INC., IDENTIFIED AS DOT-430, AND SOLD FOR USE ON CERTAIN DOMESTIC AND FOREIGN VEHICLES MAY NOT BREAK INTO SMALL PIECES AS EXPECTED OF TEMPERED GLASS AND FAILS TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 205, "GLAZING MATERIALS."
Manufacturer’s stated response
SAFELITE WILL NOTIFY ITS RETAIL CUSTOMERS AND REPLACE THE GLASS FREE OF CHARGE. RETAIL CUSTOMERS CAN CONTACT SAFELITE TOLL FREE AT 1-888-843-2906. SAFELITE WILL NOTIFY ITS WHOLESALE CUSTOMERS AND REIMBURSE WHOLESALE CUSTOMERS FOR CURRENT INVENTORY AND AT A SPECIFIED RATE FOR REPLACING THEIR CUSTOMER'S GLASS. WHOLESALE CUSTOMERS CAN CONTACT SAFELITE'S WHOLESALE DIVISION, SERVICE AUTOGLASS TOLL FREE AT 1-888-246-6298. THE RECALL BEGAN ON JANUARY 15, 2008.
Read campaign 07E104000 at NHTSAFUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMPCampaign 06E091000
Reported concern
CERTAIN AIRTEX FUEL PUMP MODULES, P/NOS. E7089M, E7094M, E7113M, AND E7129M, MANUFACTURED BETWEEN JUNE 1 AND SEPTEMBER 24, 2006. THESE FUEL PUMP MODULES WERE SOLD AS AFTERMARKET FOR USE IN CERTAIN DAIMLERCHRYSLER VEHICLES LISTED ABOVE. SILICONE MATERIAL USED IN MANUFACTURE OF THE FLAPPER VALVE WAS OUT-OF-SPECIFICATION, LEADING TO EXCESS SWELL OF THE FLAPPER VALVE RESTRICTING THE FLOW OF FUEL TO THE FUEL PUMP MODULE.
Manufacturer’s stated response
AIRTEX WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMP MODULES FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 18, 2006. OWNERS MAY CONTACT AIRTEX TOLL-FREE AT 1-866-867-3759.
Read campaign 06E091000 at NHTSAEXTERIOR LIGHTING:HEADLIGHTSCampaign 06E023000
Reported concern
CERTAIN ANZO COMBINATION HEADLAMP ASSEMBLIES SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES. SOME COMBINATION LAMPS ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS WHICH FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."
Manufacturer’s stated response
ANZO WILL NOTIFY OWNERS AND REPLACE THE HEADLAMPS FREE OF CHARGE. THE RECALL BEGAN MAY 9, 2006. OWNERS MAY CONTACT ANZO USA AT 909-468-3688.
Read campaign 06E023000 at NHTSASERVICE BRAKES, HYDRAULICCampaign 06E022000
Reported concern
CERTAIN AFTERMARKET BRAKE HYDRAULIC MASTER CYLINDERS SOLD AS REPLACEMENT BRAKE CYLINDERS FOR CERTAIN FORD, DAIMLERCHRYSLER, AND JEEP PASSENGER VEHICLES. THESE BRAKE CYLINDERS WERE SOLD UNDER THE BRAND NAMES OF NAPA, RAYBESTOS, AIMCO, AC DELCO, CARQUEST, BENDIX, AND WAGNER. ONLY PRODUCTS THAT WERE MANUFACTURED FROM JULY 27, 2005 THROUGH JANUARY 17, 2006 (DATE CODES 0529 THROUGH 0602) ARE SUBJECT TO THIS RECALL. WHEN SUBJECT TO VERY COLD TEMPERATURES, AN INTERNAL SEAL IN THE MASTER CYLINDER COULD LOSE FLEXIBILITY AND MAY CAUSE BRAKE FLUID TO LEAK.
Manufacturer’s stated response
AFFINIA (BRAKE PARTS, INC.) WILL REPLACE THE SUBJECT BRAKE HYDRAULIC MASTER CYLINDERS FREE OF CHARGE. THE RECALL BEGAN ON MARCH 20, 2006. OWNERS CAN CONTACT AFFINA GROUP CUSTOMER SERVICE AT 1-800-323-0354.
Read campaign 06E022000 at NHTSAAIR BAGSCampaign 04V480000
Reported concern
ON CERTAIN MINIVANS, THE DRIVER'S AIR BAG MAY BECOME DISABLED DUE TO A FAILURE OF THE CLOCKSPRING, WHICH IS LOCATED IN THE HUB OF THE STEERING WHEEL.
Manufacturer’s stated response
DEALERS WILL REPLACE THE CLOCKSPRING ASSEMBLY ON ALL COVERED VEHICLES WITH 70,000 MILES OR LESS. FOR THOSE VEHICLES WITH MORE THAN 70,000 MILES, DAIMLERCHRYSLER WILL OFFER AN EXTENDED LIFETIME WARRANTY UNDER WHICH IT WILL REPLACE THE CLOCKSPRING AT NO CHARGE IF IT FAILS. DAIMLERCHRYSLER WILL ALSO REIMBURSE OWNERS WHO HAVE PAID TO HAVE THE CLOCKSPRING REPLACED ON THEIR VEHICLES. THE RECALL BEGAN ON OCTOBER 12, 2004. OWNERS SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Manufacturer campaign: D17
Read campaign 04V480000 at NHTSAEQUIPMENT:OTHER:LABELSCampaign 03V505000
Reported concern
ON CERTAIN MINIVANS AND 4X2 PICKUP TRUCKS, THE VEHICLE CERTIFICATION LABEL MAY HAVE GROSS AXLE WEIGHT RATINGS (GAWR) THAT EXCEED THE MAXIMUM TIRE LOAD CAPACITY AS DEFINED IN FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 120, "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS."
Manufacturer’s stated response
OWNERS WILL BE PROVIDED WITH VEHICLE CERTIFICATION LABEL OVERLAYS CONTAINING CORRECTED INFORMATION RELATIVE TO VEHICLE GAWR AND TIRE SIZE. OWNER NOTIFICATION BEGAN MARCH 1, 2004. OWNERS SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-992-1997.
Manufacturer campaign: C41
Read campaign 03V505000 at NHTSAFUEL SYSTEM, GASOLINECampaign 03E053000
Reported concern
CERTAIN AFTERMARKET REPLACEMENT FUEL FILTERS, MODELS WIX FILTER PART NUMBERS 33576, 33577, 33734; NAPA FILTER PART NUMBERS 3576, 3577, 3734; AND CARQUEST FILTER PART NUMBERS 86576, 86577, 86734 USED ON 1996-2000 DAIMLERCHRYSLER TOWN & COUNTRY, DODGE CARAVAN, AND PLYMOUTH VOYAGER VEHICLES, CAN CAUSE THE FUEL LINES TO LEAK.
Manufacturer’s stated response
WIX WILL NOTIFY ITS CUSTOMERS AND REPLACE THE FUEL FILTERS FREE OF CHARGE. NOTE: THIS DOES NOT INVOLVE ANY PRODUCTS MANUFACTURED BY THE DAIMLERCHRYSLER CORP. NOR ANY DAILMERCHRYSLER DEALERS. OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING NOVEMBER 2003. OWNERS WHO DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT WIX AT 704-864-6711.
Read campaign 03E053000 at NHTSAEQUIPMENTCampaign 03E045000
Reported concern
AFTERMARKET REPLACEMENT FUEL FILTERS MANUFACTURED BETWEEN SEPTEMBER 17, 2002, AND JANUARY 20, 2003, SOLD UNDER THE BRAND NAMES LISTED ABOVE. THE FILTER MAY EXPERIENCE MALFUNCTION OF THE QUICK CONNECTOR EITHER BLOCKING FUEL FLOW TO THE ENGINE OR CAUSING A FUEL LEAK. THIS DOES NOT INVOLVE ANY PRODUCTS MANUFACTURED BY THE DAIMLERCHRYSLER CORP. NOR ANY DAILMERCHRYSLER DEALERS.
Manufacturer’s stated response
AFTERMARKET REPLACEMENT FUEL FILTERS FOR 1995-2000 SHORT WHEELBASE CHRYSLER TOWN & COUNTRY, PLYMOUTH VOYAGER AND DODGE CARAVAN MINIVANS PART NO. 18232 AND DATE CODE 0237, 0249, OR 0252. REPLACEMENT FUEL FILTERS FOR 1995-2000 LONG WHEELBASE CHRYSLER TOWN & COUNTRY, PLYMOUTH VOYAGER AND DODGE CARAVAN MINIVANS PART NO. 18230 AND DATE CODE 0237, 0249, 0251, OR 0304. REPLACEMENT FUEL FILTERS FOR 2001-2004 CHRYSLER TOWN & COUNTRY, PLYMOUTH VOYAGER AND DODGE CARAVAN MINIVANS PART NO. 28871 AND DATE CODE 0249. THESE PART NUMBERS AND DATE CODES APPEAR ON THE GOLD-TONE FILTER. DISTRIBUTORS AND RETAILERS WILL BE NOTIFIED TO ISOLATE AND RETURN AFFECTED INVENTORY. OWNERS WHO HAVE HAD THE FUEL FILTER SERVICED ON ONE OF THE APPLICABLE VEHICLES AFTER SEPTEMBER 17, 2002 SHOULD RETURN THEIR VEHICLE TO THE SERVICE FACILITY TO BE INSPECTED TO SEE IF THE FUEL FILTER THAT WAS INSTALLED IS ONE THAT IS INVOLVED IN THE RECALL. IF SO, THE OWNERS SHOULD HAVE THE FILTER REPLACED. TO RECEIVE A FULL REFUND PLUS THE COST OF POSTAGE, OWNERS SHOULD CUT THE CONNECTORS FROM THE HOSES, RINSE THE CONNECTORS AND RETURN THEM TOGETHER WITH PROOF OF THE AMOUNT PAID FOR THE REPLACEMENT PART AND LABOR, TO INTERCONTINENTAL AT INTERCONTINENTAL AUTO PARTS, INC., P.O. BOX 861, MAHWAH, NJ 07430, ATTN: FUEL FILTER RECALL. INTERCONTINENTAL WILL MAIL A FULL REFUND TO THE OWNER.
Read campaign 03E045000 at NHTSASTRUCTURECampaign 03V094000
Reported concern
CERTAIN PICKUP TRUCK, VAN, AND MINI VAN CONVERSIONS EQUIPPED WITH SOUTHERN COMFORT BUILT RUNNING BOARDS THAT CONTAIN CERTAIN COURTESY LIGHTS MANUFACTURED BY AMERICAN TECHNOLOGY COMPONENTS, INC. THESE UNITS CONTAIN A COURTESY LIGHT OR LIGHTS THAT MIGHT OVERHEAT WHEN THE WIRE HARNESS IS EXPOSED TO EXCESSIVE MOISTURE AND ROAD SALT.
Manufacturer’s stated response
DEALERS WILL REPLACE THE WIRING HARNESS ON THESE RUNNING BOARDS. OWNER NOTIFICATION BEGAN MARCH 7, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT SOUTHERN COMFORT AT 1-800-745-6096.
Read campaign 03V094000 at NHTSAFUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEMCampaign 00V268000
Reported concern
VEHICLE DESCRIPTION: MINI VANS BUILT WITH 3.3L AND 3.8L ENGINES HAVE FUEL RAILS WITH NITROLE RUBBER O-RING SEALS THAT CAN DEGRADE OVER TIME. FUEL LEAKAGE FROM THE UNDERHOOD FUEL INJECTION FUEL RAIL COULD RESULT, INCREASING THE LIKELIHOOD OF A VEHICLE FIRE.
Manufacturer’s stated response
DEALERS WILL INSTALL A SEAL ON THE VEHICLE FUEL RAILS TO PREVENT EXTERNAL LEAKAGE OF FUEL FROM THE FUEL RAIL CROSSOVER TUBE, SHOULD THE EXISTING O-RINGS CONTINUE TO DEGRADE. OWNER NOTIFICATION BEGAN ON JANUARY 25, 2002. DUE TO THE LARGE QUANTITY OF VEHICLES INVOLVED IN THIS CAMPAIGN, THE OWNER NOTIFICATION WILL BE PHASED OVER THE NEXT SEVERAL MONTHS. HOWEVER, IF A VEHICLE IS LEAKING FUEL FROM THE O-RINGS, THE VEHICLE SHOULD BE TAKEN INTO A DEALER TO HAVE THIS REPAIRED AS SOON AS POSSIBLE. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.
Manufacturer campaign: 895
Read campaign 00V268000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
71 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
9004275KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program …NHTSA ID 10229256
KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
Components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER. Confirm detailed applicability in the original document.
Source record 10229256 at NHTSA9004275KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program …NHTSA ID 10221686
KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
Components: ELECTRICAL SYSTEM:IGNITION:ANTI-THEFT:IMMOBILIZER/PROXIMITY:KEY/SENDER. Confirm detailed applicability in the original document.
Source record 10221686 at NHTSA08-049-20Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replaceme…NHTSA ID 10175735
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
Components: ELECTRICAL SYSTEM · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10175735 at NHTSA3100519Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.NHTSA ID 10220101
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220101 at NHTSA3100319Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.NHTSA ID 10220099
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220099 at NHTSA3100619Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.NHTSA ID 10220097
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Components: EQUIPMENT · STRUCTURE. Confirm detailed applicability in the original document.
Source record 10220097 at NHTSA31-005-19Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.NHTSA ID 10169249
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
Components: EQUIPMENT · STRUCTURE. Confirm detailed applicability in the original document.
Source record 10169249 at NHTSA31-003-19Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.NHTSA ID 10169247
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
Components: EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10169247 at NHTSA31-006-19Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.NHTSA ID 10169245
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10169245 at NHTSA68332810Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installat…NHTSA ID 10223854
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10223854 at NHTSA05191925ARadiator If vehicle comes in for transmission fluid leaking from trans-oil cooler fittings on the radiator, please perform the following before replacing the radiator/cooler:~ 1. Remove both of the transmission lines from the c…NHTSA ID 10228094
Radiator If vehicle comes in for transmission fluid leaking from trans-oil cooler fittings on the radiator, please perform the following before replacing the radiator/cooler:~ 1. Remove both of the transmission lines from the cooler?s top/bottom flared fittings on the radiator. ~ 2. Remove hex nut and the top flared fitting on the radiator tank.~ 3. Using a wire brush and gasket remover, clean off the old sealant on the smaller threaded portion of the flared fitting. Do the same for the threads on the trans oil cooler.~ 4. Apply a new application of Mopar PN 04318032 to the flared fitting, leaving the first threads free for ease of engagement.~ 5. Install the top flared fitting by hand, then torque the fitting to 235 +/- 15 Lb-In.~ 6. Install the hex nut and torque to 100 +/- 10 Lb-In.~ 7. Repeat steps 2-6 for bottom flared fitting.~ 8. Reinstall transmission line per normal installation procedures and ensure correct fluid level.~
Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10228094 at NHTSA05191925A$Radiator If vehicle comes in for transmission fluid leaking from trans-oil cooler fittings on the radiator, please perform the following before replacing the radiator/cooler:~ 1. Remove both of the transmission lines from the c…NHTSA ID 10181452
Radiator If vehicle comes in for transmission fluid leaking from trans-oil cooler fittings on the radiator, please perform the following before replacing the radiator/cooler:~ 1. Remove both of the transmission lines from the cooler?s top/bottom flared fittings on the radiator. ~ 2. Remove hex nut and the top flared fitting on the radiator tank.~ 3. Using a wire brush and gasket remover, clean off the old sealant on the smaller threaded portion of the flared fitting. Do the same for the threads on the trans oil cooler.~ 4. Apply a new application of Mopar PN 04318032 to the flared fitting, leaving the first threads free for ease of engagement.~ 5. Install the top flared fitting by hand, then torque the fitting to 235 +/- 15 Lb-In.~ 6. Install the hex nut and torque to 100 +/- 10 Lb-In.~ 7. Repeat steps 2-6 for bottom flared fitting.~ 8. Reinstall transmission line per normal installation procedures and ensure correct fluid level.~
Components: ENGINE AND ENGINE COOLING · EQUIPMENT · POWER TRAIN. Confirm detailed applicability in the original document.
Source record 10181452 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
DRIVER AIR BAG CLOCKSPRING FAILUREEA04013
THE DRIVER AIR BAG CLOCKSPRING CAN DEVELOP AN OPEN-CIRCUIT CONDITION RESULTING IN NONFUNCTIONAL DRIVER-SIDE FRONTAL AIR BAG, HORN, CRUISE CONTROL (IF EQUIPPED), AND/OR STEERING WHEEL RADIO CONTROL (IF EQUIPPED).IN ITS OCTOBER 5, 2004 LETTER TO NHTSA, DAIMLERCHRYSLER STATED THAT IT WILL CONDUCT A SAFETY RECALL AND REPLACE THE CLOCKSPRING ASSEMBLY ON ALL MY 1998.5-2000 DAIMLERCHRYSLER MINIVANS, BUILT BETWEEN MARCH 1998 AND AUGUST 2000, WITH 70,000 MILES OR LESS.IT WILL ALSO PROVIDE A LIFETIME WARRANTY FOR THIS COMPONENT ON MY 1998.5-2000 MINIVANS, REGARDLESS OF MILEAGE.THE DETAILS OF THE CORRECTIVE ACTION ARE DESCRIBED IN DAIMLERCHRYSLER'S LETTER (SEE RECALL NO. 04V-480).THE AGENCY BELIEVES THAT FURTHER EXPENDITURE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS WITH RESPECT TO THOSE VEHICLES COVERED ONLY BY THE LIFETIME WARRANTY.THE AGENCY WILL TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.SEE PAGE 2 FOR ADDITIONAL INFORMATION.
Recorded closure: May 25, 2005
Campaign reference in the source: 04V480000
Find investigation EA04013AIR BAG CLOCKSPRINGEA01007
There is no summary currently available
Recorded closure: Nov 22, 2002
Campaign reference in the source: 02V293000
Find investigation EA01007DC MINIVAN FUEL INJECTOR RAIL LEAKRQ00008
There is no summary currently available
Recorded closure: Mar 18, 2002
Campaign reference in the source: 00V268000
Find investigation RQ00008Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.