The vehicle dossier US · 2017
2017 BMW
X1Problems & recalls
156 distinct owner reports in the NHTSA snapshot. Other components appears in 60 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 156 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 9 years with reports.
50,210 miles is the median among 13 reports with usable mileage. The middle half spans 12,000–60,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
2 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
STRUCTURE:BODY:ROOF AND PILLARSCampaign 19V349000
Reported concern
BMW of North America, LLC (BMW) is recalling certain 2016-2019 X1 sDrive28i and X1 xDrive28i vehicles. In the event of a crash where the occupants head contacts the B-pillar, the pillar may not absorb an adequate amount of the impact. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 201, "Occupant Protection in Interior Impact."
Manufacturer’s stated response
BMW will notify owners, and dealers will replace the vertical trim pieces on the upper portion of the interior B-Pillars, free of charge. Interim letters notifying owners of the safety risk were mailed July 1, 2019. Second notices will be sent as parts become available, starting on September 27, 2019. Owners may contact BMW customer service at 1-800-525-7417.
Read campaign 19V349000 at NHTSASEAT BELTS:FRONT:RETRACTORCampaign 16V747000
Reported concern
BMW of North America, LLC (BMW) is recalling certain model year 2016-2017 X1 sDrive28i, X1 xDrive28i, MINI Hardtop 4 Door Cooper, Mini Hardtop 4 Door Cooper S, MINI Cooper Clubman, and Cooper S Clubman, 2017 Rolls-Royce Ghost, and 2016 528i vehicles. The vehicle-sensitive locking mechanism of the seat belt Emergency Locking Retractor (ELR) for the driver's seat may not lock as designed. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) number 209, "Seat Belt Assemblies."
Manufacturer’s stated response
BMW will notify owners, and dealers will replace the driver's seat belt assembly, free of charge. The recall began July 3, 2019. Owners may contact BMW customer service at 1-800-525-7417.
Read campaign 16V747000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
189 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
B010224The EVAP systems purge (vent) valve limited warranty for defects in materials and / or workmanship has been extended to 15 years / 150,000 miles as determined from the original first in-service / delivery date.NHTSA ID 11035496
The EVAP systems purge (vent) valve limited warranty for defects in materials and / or workmanship has been extended to 15 years / 150,000 miles as determined from the original first in-service / delivery date.
Campaign / software reference: 1390900300
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11035496 at NHTSAB010925The limited warranty for the automatic transmissions Selector Lever Magnetic Shift Interlock Mechanism (Gearshift lug assembly portion) has been extended to 10 years / 120,000 miles, as determined by the vehicles original first…NHTSA ID 11021117
The limited warranty for the automatic transmissions Selector Lever Magnetic Shift Interlock Mechanism (Gearshift lug assembly portion) has been extended to 10 years / 120,000 miles, as determined by the vehicles original first in-service / delivery date, when a gearshift lug repair kit installation procedure is required to be performed to address a displayed Check Control message (CCM) that states P not engaged - secure vehicle with parking brake against rolling away
Campaign / software reference: 2516900100
Components: POWER TRAIN. Confirm detailed applicability in the original document.
Source record 11021117 at NHTSAB840324The “End of life” or “Emergency call system error” Check Control message appears in the vehicle. The following fault memory entry is stored: B7F341 – Emergency battery: Hardware faultyNHTSA ID 11009005
The “End of life” or “Emergency call system error” Check Control message appears in the vehicle. The following fault memory entry is stored: B7F341 – Emergency battery: Hardware faulty
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 11009005 at NHTSAB010419For this vehicle, the EVAP systems purge (vent) valve limited warranty for defects in materials or workmanship has been extended to 15 years/150,000 miles, from the original 10 years/120,000 miles, as determined from the origin…NHTSA ID 11008102
For this vehicle, the EVAP systems purge (vent) valve limited warranty for defects in materials or workmanship has been extended to 15 years/150,000 miles, from the original 10 years/120,000 miles, as determined from the original in-service date. This coverage is subject to the same vehicle eligibility requirements, limitations, and exclusion criteria that apply to the BMW New Vehicle Limited Warranty. Vehicles that are registered in California or a State that has fully adopted the State of California PZEV(SULEV) emission regulation (State of registration, model, and model year dependent), the emission-relevant coverage for this component is 15 years/150,000 miles.
Campaign / software reference: 1390900300
Components: ENGINE. Confirm detailed applicability in the original document.
Source record 11008102 at NHTSAB640416Customer complains of a musty odor or damp front footwell carpet.NHTSA ID 10249435
Customer complains of a musty odor or damp front footwell carpet.
Components: STRUCTURE. Confirm detailed applicability in the original document.
Source record 10249435 at NHTSAB611305The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the…NHTSA ID 10249027
The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle âÂÂdischarged batteryâ complaints.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10249027 at NHTSAB521723Customer states one of the front seats is inoperative. The seat heater and power supply are inoperative. During the vehicle test, the seat module does not respond. The power supply fuse for the seat module isfound to have blown.NHTSA ID 10249023
Customer states one of the front seats is inoperative. The seat heater and power supply are inoperative. During the vehicle test, the seat module does not respond. The power supply fuse for the seat module isfound to have blown.
Components: ELECTRICAL SYSTEM · SEATS. Confirm detailed applicability in the original document.
Source record 10249023 at NHTSAB160623Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fue…NHTSA ID 10247567
Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fuel pump: pressure value too low CDA594 - Message (- 0x33E) missing, receiver DME, transmitter TFE
Components: ENGINE AND ENGINE COOLING · FUEL SYSTEM, GASOLINE. Confirm detailed applicability in the original document.
Source record 10247567 at NHTSAB521723Customer states one of the front seats is inoperative. The seat heater and power supply are inoperative .During the vehicle test, the seat module does not respond. The power supply fuse for the seat module is found to have blown.NHTSA ID 10247576
Customer states one of the front seats is inoperative. The seat heater and power supply are inoperative .During the vehicle test, the seat module does not respond. The power supply fuse for the seat module is found to have blown.
Components: SEATS. Confirm detailed applicability in the original document.
Source record 10247576 at NHTSAB612723When using the Key Reader to retrieve CBS information from the customer key, no current vehicle data is available, or the data does not match the maintenance schedule.NHTSA ID 10247578
When using the Key Reader to retrieve CBS information from the customer key, no current vehicle data is available, or the data does not match the maintenance schedule.
Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10247578 at NHTSAB653423Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicleâÂÂs equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking con…NHTSA ID 10245422
Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicleâÂÂs equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking confirmation) is noticeable. Additionally, the red anti-theft alarm LED in the interior mirror does not briefly flash every 2 seconds, indicating the alarm is armed.
Components: ELECTRICAL SYSTEM · EQUIPMENT. Confirm detailed applicability in the original document.
Source record 10245422 at NHTSAB120723Vehicle exhibits a slight acceleration delay when taking off from a MSA (automatic engine start-stopfunction) stop.NHTSA ID 10245368
Vehicle exhibits a slight acceleration delay when taking off from a MSA (automatic engine start-stopfunction) stop.
Components: ELECTRICAL SYSTEM · ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.
Source record 10245368 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Desiccated Air Bag Inflator RuptureEA21002
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Find investigation EA21002Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.