The vehicle dossier US · 2015

2015 BMW
528IProblems & recalls

65 distinct owner reports in the NHTSA snapshot. Engine appears in 47 of them. Explore what was reported—and which official actions are on file.

Snapshot Sep 28, 2026Live NHTSA complaint API How this dossier is compiled

01 / Owner-reported evidence

What owners reported.

Categories attached to 65 distinct reports. A report can mention more than one component, so category totals can overlap.

Engine47 reports
Electrical system36 reports
Other components11 reports
Body & structure5 reports
Transmission & drivetrain3 reports
Fuel system3 reports
Visibility2 reports
Air bags1 reports
See original component labels
ELECTRICAL SYSTEM36
ENGINE AND ENGINE COOLING33
ENGINE14
UNKNOWN OR OTHER7
STRUCTURE:BODY5
POWER TRAIN3
VISIBILITY:SUN/MOON ROOF ASSEMBLY2
FUEL/PROPULSION SYSTEM2
WHEELS1
VISIBILITY/WIPER1
SEAT BELTS1
AIR BAGS1
FUEL SYSTEM, GASOLINE1
EXTERIOR LIGHTING1
EXTERIOR LIGHTING:HEADLIGHTS1

These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.

The reporting timeline

When reports arrived.

Reports by year filed, not by the year a problem occurred. Showing the latest 9 years with reports.

Year filed (last two digits)Latest report: Aug 28, 2026
Mileage, where supplied

80,000 miles is the median among 28 reports with usable mileage. The middle half spans 55,000–98,000 miles.

This describes the submitted reports. It does not predict when a vehicle will fail.

02 / Official safety campaigns

1 recall campaign on file.

A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.

Aug 13, 2024 Safety recallELECTRICAL SYSTEM:WIRING:CONNECTORS/PLUGS/RECEPTACLESCampaign 24V608000

Reported concern

BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.

Manufacturer’s stated response

Dealers will inspect and replace the water pump and plug connector as necessary, and install a protective shield, free of charge. Owner notification letters were mailed on March 28, 2025. Owners may contact BMW customer service at 1-800-525-7417.

Read campaign 24V608000 at NHTSA
Check this car’s VIN at NHTSA

03 / The manufacturer’s record

Instructions. Updates. Responses.

271 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.

Jan 16, 2024 Service Bulletin/Repair InstructionsB510819The basic conditions for initializing the power windows are not met.NHTSA ID 10249437

The basic conditions for initializing the power windows are not met.

Components: ELECTRICAL SYSTEM · VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. Confirm detailed applicability in the original document.

Source record 10249437 at NHTSA
Jan 11, 2024 Service Bulletin/Repair InstructionsB611305The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the…NHTSA ID 10249027

The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle “discharged battery” complaints.

Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.

Source record 10249027 at NHTSA
Dec 20, 2023 Service Bulletin/Repair InstructionsB160623Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fue…NHTSA ID 10247567

Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fuel pump: pressure value too low CDA594 - Message (- 0x33E) missing, receiver DME, transmitter TFE

Components: ENGINE AND ENGINE COOLING · FUEL SYSTEM, GASOLINE. Confirm detailed applicability in the original document.

Source record 10247567 at NHTSA
Nov 22, 2023 Service Bulletin/Repair InstructionsB653423Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicle’s equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking con…NHTSA ID 10245422

Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicle’s equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking confirmation) is noticeable. Additionally, the red anti-theft alarm LED in the interior mirror does not briefly flash every 2 seconds, indicating the alarm is armed.

Components: ELECTRICAL SYSTEM · EQUIPMENT. Confirm detailed applicability in the original document.

Source record 10245422 at NHTSA
Nov 16, 2023 Service Bulletin/Repair InstructionsB010919DIESEL FUEL INJECTORS: LTD WTY EXTENSION TO 10 YEARS/120,000 MILESNHTSA ID 10245364

DIESEL FUEL INJECTORS: LTD WTY EXTENSION TO 10 YEARS/120,000 MILES

Components: ENGINE AND ENGINE COOLING. Confirm detailed applicability in the original document.

Source record 10245364 at NHTSA
Jun 1, 2023 Service Bulletin/Repair InstructionsB340914The Dynamic Stability Control (DSC) warning light comes on while driving. The following DSC fault codes for the wheel speed sensors are stored: 480712 and/or 480715 and/or 480718 and/or 48071B They cannot be cleared, even thoug…NHTSA ID 10239605

The Dynamic Stability Control (DSC) warning light comes on while driving. The following DSC fault codes for the wheel speed sensors are stored: 480712 and/or 480715 and/or 480718 and/or 48071B They cannot be cleared, even though the wheel speed sensors work correctly and no problem can be found with the wiring harness.

Components: WHEELS. Confirm detailed applicability in the original document.

Source record 10239605 at NHTSA
May 1, 2023 Service Bulletin/Repair InstructionsB651523After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.NHTSA ID 10238090

After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.

Components: ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.

Source record 10238090 at NHTSA
Dec 1, 2022 Service Bulletin/Repair InstructionsB010919For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's Fuel Injectors to 10 years/120,000 miles as determined by the vehicle's original in-service date.NHTSA ID 10230717

For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle's Fuel Injectors to 10 years/120,000 miles as determined by the vehicle's original in-service date.

Components: FUEL SYSTEM, GASOLINE. Confirm detailed applicability in the original document.

Source record 10230717 at NHTSA
Dec 1, 2022 Service Bulletin/Repair InstructionsB010122With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a nationwide settlement with the plaintiffs in the following class action: Isley, et al. v. Bayerische Motoren Werke Aktiengesellschaft and BM…NHTSA ID 10230716

With the court's FINAL approval, BMW of North America, LLC (BMW NA) has entered into a nationwide settlement with the plaintiffs in the following class action: Isley, et al. v. Bayerische Motoren Werke Aktiengesellschaft and BMW of North America, LLC.

Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. Confirm detailed applicability in the original document.

Source record 10230716 at NHTSA
Oct 1, 2022 Service Bulletin/Repair InstructionsB650414According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 - Seat occupancy detection, front passenger; malfunction" is stored.…NHTSA ID 10227568

According to the customer, the airbag warning light was on, but it may not be illuminated when the vehicle arrives in the workshop. 1. ACSM fault code "930A60 - Seat occupancy detection, front passenger; malfunction" is stored. The fault may or may not currently be present. Or 2. ACSM fault code "930A1C - Front passenger seat occupancy detection transmitting fault(moisture)" is stored. The fault may or may not currently be present.

Components: AIR BAGS · BACK OVER PREVENTION · LANE DEPARTURE · SEATS:BARRIERS · UNKNOWN OR OTHER. Confirm detailed applicability in the original document.

Source record 10227568 at NHTSA
Jun 1, 2022 Service Bulletin/Repair InstructionsSIB011418Component specific limited warranty extension for the Exhaust Gas Recirculation Valve.NHTSA ID 10218318

Component specific limited warranty extension for the Exhaust Gas Recirculation Valve.

Components: ENGINE AND ENGINE COOLING · FUEL SYSTEM, GASOLINE. Confirm detailed applicability in the original document.

Source record 10218318 at NHTSA
May 1, 2022 Service Bulletin/Repair InstructionsSIB011918Component specific limited warranty extension. For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle Nitrogen Oxide (NOx) Sensor(s) to: 10 years/120,000 miles as determi…NHTSA ID 10215746

Component specific limited warranty extension. For the eligible vehicles, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicle Nitrogen Oxide (NOx) Sensor(s) to: 10 years/120,000 miles as determined by the vehicle original in-service date.

Components: ENGINE AND ENGINE COOLING:ENGINE:CRANK/CAMSHAFT POSITION SENSOR · EQUIPMENT. Confirm detailed applicability in the original document.

Source record 10215746 at NHTSA
Browse all manufacturer records by page

Records below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.

04 / Agency investigations

Official inquiries.

An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.

Opened Sep 17, 2021 No close date recordedDesiccated Air Bag Inflator RuptureEA21002

From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Find investigation EA21002

Your next step

Take good questions
to the inspection.

Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.