The vehicle dossier US · 2000
2000 BMW
328IProblems & recalls
112 distinct owner reports in the NHTSA snapshot. Air bags appears in 35 of them. Explore what was reported—and which official actions are on file.
01 / Owner-reported evidence
What owners reported.
Categories attached to 112 distinct reports. A report can mention more than one component, so category totals can overlap.
See original component labels
These are reports made to NHTSA, not verified diagnoses. More reports can reflect more vehicles, more time on the road, or greater reporting activity.
The reporting timeline
When reports arrived.
Reports by year filed, not by the year a problem occurred. Showing the latest 15 years with reports.
111,350 miles is the median among 76 reports with usable mileage. The middle half spans 70,000–149,000 miles.
This describes the submitted reports. It does not predict when a vehicle will fail.
02 / Official safety campaigns
7 recall campaigns on file.
A campaign can cover only certain production dates or configurations. The count does not tell you whether an individual car has an open recall.
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULECampaign 21V401000
Reported concern
BMW of North America, LLC (BMW) is recalling certain 2000-2001 BMW 3 Series (323Ci, 325Ci, 328Ci and 330Ci), 1999-2001 323i, 328i, 330i, 330xi, and 2000 323i, 328i stationwagon vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles are equipped with driver-side air bag inflators that were previously inspected, but not replaced under recall numbers 19V-851, 19V852, or 19V-853. Due to a manufacturing issue, the NADI inflator may absorb moisture, causing the inflator to explode or the air bag cushion to underinflate.
Manufacturer’s stated response
Dealers will replace the driver-side air bag inflator with a newly designed inflator, free of charge. Owner notification letters were mailed on July 12, 2021. Owners may contact BMW customer service at 1-800-525-7417.
Read campaign 21V401000 at NHTSAAIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULECampaign 20V018000
A do-not-drive advisory is recorded. Verify applicability immediately with NHTSA or the manufacturer.
Reported concern
BMW of North America, LLC (BMW) is recalling certain 2000-2005 323iT, 325iT, 325xiT, 320i, 323i, 325i, 325xi, 328i, 330i and 330xi and 2000-2006 323Ci, 325Ci, 328Ci, 330Ci, M3 Coupe, 323Cic, 325Cic, 330Cic, and M3 Convertible vehicles equipped with non-desiccated frontal Takata PSAN inflators and PSPI passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Manufacturer’s stated response
BMW will notify owners, and dealers will replace the passenger's front air bag, free of charge. The recall began February 13, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Read campaign 20V018000 at NHTSAAIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULECampaign 19V853000
Reported concern
BMW of North America, LLC (BMW) is recalling certain 1999-2001 323i, 325i, 328i and 330i and 2000-2001 323Ci, 325Ci, 328Ci, 330Ci, 323iT, and 325iT vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles may have received a replacement driver air bag as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.
Manufacturer’s stated response
BMW notified owners, and Dealers will replace the driver air bag inflators, free of charge. The recall began November 10, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Read campaign 19V853000 at NHTSAAIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULECampaign 19V852000
Reported concern
BMW of North America, LLC (BMW) is recalling certain 1999-2000 323i and 328i and 2000 323Ci and 328Ci vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These inflators do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.
Manufacturer’s stated response
BMW will mail interim notices informing owners of the safety risk on January 17, 2020. Owners will receive a second notice when the remedy becomes available. Dealers will inspect the driver air bag inflators and replace them, as necessary, free of charge. BMW mailed interim notices informing owners of the safety risk on January 17, 2020. The recall began July 27, 2020. Owners may contact BMW customer service at 1-800-525-7417.
Read campaign 19V852000 at NHTSAAIR BAGSCampaign 14V428000
A do-not-drive advisory is recorded. Verify applicability immediately with NHTSA or the manufacturer.
Reported concern
BMW of North America, LLC (BMW) is recalling certain model year 2000 323i sedans, coupes, convertibles, and Sports Wagons; 2000 328i sedans and coupes; 2001-2005 325i sedans, coupes, convertibles, and Sport Wagons; 2001-2005 325xi sedans and Sports Wagons; 2006 325i coupes and convertibles; 2001-2006 330i sedans, coupes, and convertibles; 2001-2005 330xi sedans; and 2001-2006 M3 coupes and convertibles to address a safety defect in the passenger side frontal air bag which may produce excessive internal pressure that could cause the air bag inflator to rupture upon deployment of the air bag.
Manufacturer’s stated response
Owners are advised not to drive their vehicles until they have been repaired. BMW will notify owners, and dealers will replace the passenger side frontal air bag, free of charge. An interim notice was mailed to owners in September 2014. A second notice was mailed when an adequate supply of parts became available, on December 1, 2014. Owners may contact BMW customer service at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Read campaign 14V428000 at NHTSAAIR BAGS:SIDE/WINDOWCampaign 02V223000
Reported concern
ON CERTAIN 4-DOOR PASSENGER VEHICLES, THE SIDE AIR BAG SYSTEM COULD DEPLOY IN CERTAIN NON-CRASH IMPACTS, SUCH AS WHEN CONTACTING LARGE POTHOLES OR CURBS AT SUBSTANTIAL SPEEDS.
Manufacturer’s stated response
DEALERS WILL RECALIBRATE THE CENTRAL AIR BAG CONTROL MODULE TO REDUCE THE POSSIBILITY OF SUCH A NON-CRASH DEPLOYMENT. OWNER NOTIFICATION BEGAN OCTOBER 25, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.
Manufacturer campaign: E46
Read campaign 02V223000 at NHTSAEXTERIOR LIGHTING:BRAKE LIGHTS:SWITCHCampaign 00V048000
Reported concern
VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE BRAKE LAMPS IN THESE VEHICLES ARE CONTROLLED BY A SWITCH ACTIVATED BY THE MOVEMENT OF THE BRAKE PEDAL. THIS SWITCH COULD FAIL INTERNALLY, CAUSING IT TO REMAIN EITHER IN THE "BRAKE LAMPS OFF" POSITION OR IN THE "BRAKE LAMPS ON" POSITION.
Manufacturer’s stated response
DEALERS WILL INSPECT AND, IF NECESSARY, REPLACE THE EXISTING BRAKE LAMP SWITCH WITH AN IMPROVED SWITCH.
Read campaign 00V048000 at NHTSA03 / The manufacturer’s record
Instructions. Updates. Responses.
17 distinct communications list this model-year. Showing the latest 12. A matching model-year does not establish that every engine, trim or reported symptom is covered.
B510819The basic conditions for initializing the power windows are not met.NHTSA ID 10249437
The basic conditions for initializing the power windows are not met.
Components: ELECTRICAL SYSTEM · VISIBILITY:POWER WINDOW DEVICES AND CONTROLS. Confirm detailed applicability in the original document.
Source record 10249437 at NHTSAB340414Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less th…NHTSA ID 10194296
Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
Components: SERVICE BRAKES, AIR:DISC · STEERING: STEERING WHEEL/HANDLE BAR. Confirm detailed applicability in the original document.
Source record 10194296 at NHTSAB651820SERVICE ACTION - HEAD AIR BAG HOLDER RETROFIT: A rattle noise may develop from the head air bag (ITS) gas generator contacting adjacent component. This noise can be heard while driving on an uneven roadway.NHTSA ID 10184591
SERVICE ACTION - HEAD AIR BAG HOLDER RETROFIT: A rattle noise may develop from the head air bag (ITS) gas generator contacting adjacent component. This noise can be heard while driving on an uneven roadway.
Components: AIR BAGS:FRONTAL · EQUIPMENT · EQUIPMENT ADAPTIVE/MOBILITY. Confirm detailed applicability in the original document.
Source record 10184591 at NHTSAB013118TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.NHTSA ID 10160287
TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 10160287 at NHTSAB013118TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.NHTSA ID 10160244
TAKATA AIR BAG RECALL-RELATED SHORT-TERM ALTERNATE TRANSPORTATION AND CONSEQUENTIAL REPAIRS This Service Information bulletin supersedes SI B01 31 18 dated October 2018.
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 10160244 at NHTSAB011618TAKATA CLASS ACTION SETTLEMENT. CUSTOMER SUPPORT PROGRAM. FRONT DRIVER SIDE AIRBAG MODULES.NHTSA ID 10153726
TAKATA CLASS ACTION SETTLEMENT. CUSTOMER SUPPORT PROGRAM. FRONT DRIVER SIDE AIRBAG MODULES.
Components: AIR BAGS · AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE. Confirm detailed applicability in the original document.
Source record 10153726 at NHTSAB011718For the above-referenced vehicles with passenger?s side airbag modules, BMW of North America, LLC (?BMW NA?) will provide a Customer Support Program as outlined in the Takata Settlement Customer Support Program Overview attachm…NHTSA ID 10149558
For the above-referenced vehicles with passenger?s side airbag modules, BMW of North America, LLC (?BMW NA?) will provide a Customer Support Program as outlined in the Takata Settlement Customer Support Program Overview attachment. This ?component-specific? customer support program applies only if there is a defect in materials or workmanship of the Takata passenger?s side airbag module in a listed vehicle.
Components: AIR BAGS · ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10149558 at NHTSAB011618For the above-referenced vehicles with driver?s side airbag modules, BMW of North America, LLC (?BMW NA?) will provide a Customer Support Program as outlined in the Takata Settlement Customer Support Program Overview attachment…NHTSA ID 10149557
For the above-referenced vehicles with driver?s side airbag modules, BMW of North America, LLC (?BMW NA?) will provide a Customer Support Program as outlined in the Takata Settlement Customer Support Program Overview attachment. This ?component-specific? customer support program applies only if there is a defect in materials or workmanship of the Takata driver?s side airbag module in a listed vehicle.
Components: AIR BAGS · ELECTRICAL SYSTEM. Confirm detailed applicability in the original document.
Source record 10149557 at NHTSAB080119In an effort to improve the completion rate on Takata air bag recall affected vehicles; BMW NA has expanded the BMW Ultimate Rewards platform to include a new Recall Support page. This page will allow IRFs to check their custom…NHTSA ID 10154816
In an effort to improve the completion rate on Takata air bag recall affected vehicles; BMW NA has expanded the BMW Ultimate Rewards platform to include a new Recall Support page. This page will allow IRFs to check their customers VINs for open Takata recalls; and get rewarded for helping us with completing repairs.
Components: AIR BAGS. Confirm detailed applicability in the original document.
Source record 10154816 at NHTSAB121616OXYGEN SENSORS - READINESS CODE MONITOR IS NOT SET. Vehicle may not pass the state inspection (SMOG or I/M) due to oxygen sensors readiness monitor not set/not fitted/not supported. DME software error.NHTSA ID 10147534
OXYGEN SENSORS - READINESS CODE MONITOR IS NOT SET. Vehicle may not pass the state inspection (SMOG or I/M) due to oxygen sensors readiness monitor not set/not fitted/not supported. DME software error.
Components: ELECTRICAL SYSTEM:SOFTWARE. Confirm detailed applicability in the original document.
Source record 10147534 at NHTSAB340414Diagnosis of Compound Brake System Complaints in M Vehicles This Service Information bulletin supersedes SI 34 04 14 dated December 2014. Designates changes to the bulletin. INFORMATION 1.Visible cracks are caused by high therm…NHTSA ID 10147242
Diagnosis of Compound Brake System Complaints in M Vehicles This Service Information bulletin supersedes SI 34 04 14 dated December 2014. Designates changes to the bulletin. INFORMATION 1.Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form. These surface hairline cracks are usually spread over the entire brake disc friction area, and have no negative influence on the durability or braking performance. The rotors should not be replaced only for their appearance reasons.When performing routine service on the brake system (pad replacement due to wear), the brake discs should be replaced if surface cracks are found to be greater than 13 mm, or if the brake disc thickness is below the minimum thickness. Always replace brake discs in pairs (per axle). Install new brake pads when replacing discs. By doing this, the service life of the friction pad surface is increased, and an even material loss is ensured. 2. Vibrations and/or steering wheel torsional vibrations during braking are caused by applying the brakes on discs with minimal to heavy corrosion. These vibrations are most noticeable when braking from high speeds with cold brake components (less than 212 degrees F), and will diminish with normal everyday operation. Parts replacement is not required. 3.After high brake loads, running noises can be heard when applying the brakes, and may also be heard to a limited extent after the brakes are released. (See the note in the Owner's Manual). These noises are reduced during normal everyday operation, due to further erosion of the brake pad friction lining. Visible surface cracks or craterlike recesses on the brake pad surface are caused by a minor difference in the material of the pad lining, which will decrease with further operation and should not be replaced due to their appearance.
Components: SERVICE BRAKES, HYDRAULIC · SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC. Confirm detailed applicability in the original document.
Source record 10147242 at NHTSA340414Diagnosis of Compound Brake System Complaints in M Vehicles. INFORMATION 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake compone…NHTSA ID 10148179
Diagnosis of Compound Brake System Complaints in M Vehicles. INFORMATION 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form. These surface hairline cracks are usually spread over the entire brake disc friction area, and have no negative influence on the durability or braking performance. The rotors should not be replaced only for their appearance reasons. When performing routine service on the brake system (pad replacement due to wear), the brake discs should be replaced if surface cracks are found to be greater than 13 mm, or if the brake disc thickness is below the minimum thickness. Always replace brake discs in pairs (per axle). Install new brake pads when replacing discs. By doing this, the service life of the friction pad surface is increased, and an even material loss is ensured. 2. Vibrations and/or steering wheel torsional vibrations during braking are caused by applying the brakes on discs with minimal to heavy corrosion. These vibrations are most noticeable when braking from high speeds with cold brake components (less than 212 degrees F), and will diminish with normal everyday operation. Parts replacement is not required. 3. After high brake loads, running noises can be heard when applying the brakes, and may also be heard to a limited extent after the brakes are released. (See the note in the Owner's Manual). These noises are reduced during normal everyday operation, due to further erosion of the brake pad friction lining. Visible surface cracks or craterlike recesses on the brake pad surface are caused by a minor difference in the material of the pad lining, which will decrease with further operation and should not be replaced due to their appearance.
Components: SERVICE BRAKES, HYDRAULIC. Confirm detailed applicability in the original document.
Source record 10148179 at NHTSARecords below contain the NHTSA bulk summary unless a document-reviewed explainer is linked. A service bulletin is not a safety recall or a promise of a free repair. Records may be revised or superseded; verify the current document with the manufacturer.
04 / Agency investigations
Official inquiries.
An investigation is an inquiry into a potential concern. Its presence does not establish a defect, and a closed case does not certify a car’s condition.
Your next step
Take good questions
to the inspection.
Use these prompts with a qualified inspector. This page is research, not a diagnosis or a substitute for a hands-on inspection.